Flat cover
117
Body
5
Securing elements
Fig. 52
Corner version: Elastic cable
Fig. 53
Elastic cable
1
Elastic cable
2
Plastic hook
3
Round button
4
Metal hook
5
Round ring
Pull the elastic cord (Fig. 53 /1) through the round rings
(Fig. 53 /5) in the cover.
Hook the ends of the hook into each other.
Pull the elastic cable over all round buttons (Fig. 53 /3) -
the flat cover is tensioned.
Make sure that the elastic cable is routed properly
around the corners (Fig. 52 ).
Fig. 54
Corner version: Staples
Fig. 55
Staples
1
Staples, open
2
Staple, closed
3
Flat ring
Pull and rotate the staple by 90° (horizontal position).
The staples (Fig. 55 /1) are open.
Push the flat rings (Fig. 55 /3) over the staples all around
the trailer.
Pull and rotate the staples by 90° (vertical position).
The staples (Fig. 55 /2) are closed.
Fig. 56
Corner version: Tension rope with hooks
Fig. 57
Tension rope with hooks
1
Round ring
2
Tension rope
3
Drop side slot
4
Hook
The tension ropes (Fig. 57 /2) with hooks are attached in
the round rings (Fig. 57 /1).
Pull the hooks (Fig. 57 /4) down and hook them all
around the trailer into the bottom edge in the drop side
slot (Fig. 57 /3).
A - 030
A - 031
1
2
4
3
5
A - 038
A - 032
2
1
3
A - 035
A - 035
A - 036
1
2
4
3
Summary of Contents for 1000 Series
