Lubrication
7
166
Testing, care and maintenance
Telescopic support
Fig. 58
Supports: Lubrication points
1
Grease nipple telescopic crank stand (can be swivelled)
2
Grease nipple telescopic crank stand (fixed)
3
Grease nipple folding supports
Lubricate the supports at the grease nipple
(Fig. 58 /1,2,3) using a grease gun.
Crank the supports up and down several times - the
grease will distribute itself.
Prop stand
Fig. 59
Prop stands: Lubrication points
1
Cylinder body
2
Clamp / console
3
T-handle screw
4
Washer
The cylinder body (Fig. 59 /1) outside and the
clamp (Fig. 59 /2) may not be greased!
Unscrew the T-handle screw (Fig. 59 /3) and open the
clamp (Fig. 59 /2).
Remove the prop stand.
Lubricate the T-handle screw on the thread and washer
(Fig. 59 /4).
Make sure that no grease gets onto the cylinder body of
the prop stand or the clamp.
Position the prop stand and clamp the cylinder body tight
using the clamp.
Corner leg
Fig. 60
Corner legs: Lubrication points
1
Square neck / bearing point
2
Spindle (open)
3
Bearing points
The open spindle (Fig. 60 /2) must not be
lubricated with grease! Grease hardens at low
temperatures - may lead to malfunction.
Crank the corner leg out.
Drip a little machine oil onto the open spindle
(Fig. 60 /2).
Lubricate the bearing point on the square neck
(Fig. 60 /1) and bearing point (Fig. 60 /3) on the outside.
Crank the supports in and out several times - the grease
will distribute itself.
W - 062
1
2
3
W - 063
1
2
3
4
W - 064
1
2
3
3
Summary of Contents for 1000 Series
