Humbaur 4000 Series Operating Instructions Manual Download

Page: 16 / 26

Version 2019/01

Operating Instruction Manual HKT (Part 2)

High cover with ramp door

Closed cover

1.  Eyelet
2.  Belt
3.  Cover
4.  Buckle, to one side
5.  Staple
6.  Ramp door
7.  Tension rope with hooks

Releasing / opening the high cover

►

Release the tension ropes and hooks from the holes in

the ramp wall.

►

Open the buckles on both sides.

►

Pull the belt upwards out of the eyelets on both sides.

►

Carefully roll up the rear part of the high cover and use

the two buckles to attach it to the upper holding eyelets

or place it onto the roof of the frame.

Closing / securing the high cover

►

Insert the slats.

►

Carefully lower the back of the high cover.

►

Close the buckles on all belts and hook all open staples

into the eyelets.

►

Hook the tension ropes into the holes on the ramp door.

►

Carefully insert the winding shaft in the attachment rings

and secure the winding shaft, using the securing springs.

6.7 Operating the "box body" tailgate

WARNING

Risk of tipping over!

When the tailgate is opened, the trailer could tip
back - risk of impact / crushing!

►

Couple the trailer to the towing vehicle before opening

the tailgate or first lower the cargo bed.

Mind your head!

It is easy to knock your head on the open tailgate.

►

Carefully step onto / off the cargo bed.

- Duck if necessary.

Opening

Unlocking the tailgate

1.  Locking lugs
2.  Bolt handle
3.  Pressure safety device
4.  Safety lock

►

Grip the bolt handle with one hand and push in the

pressure protection mechanism.

- The bolt handle will be released.

►

Push the bolt handle downwards.

- The locking lugs (right and left) are released.

►

Carefully push up the tailgate.

►

Lock the gas strut with the piston retainer.

Opening the ramp door

Unlocking the ramp door

1.  Snap locks
2.  Ramp door
3.  Locking bracket
4.  Gas strut lock (piston retainer)

CAUTION

Summary of Contents for 4000 Series



























Search results

Summary of Contents for 4000 Series

Reviews:

Related manuals for 4000 Series

Brands by name

Popular brands

Humbaur 4000 Series, Operating Instructions Manual

Search results

Summary of Contents for 4000 Series

Reviews:

Related manuals for 4000 Series

Brands by name

Popular brands