Operati ng Instructi on Manual
V 03/2018
19/
56
Braked trailer coupled
1.
Handle, secured
2.
Safety catch, clicked in place
3.
Safety cable, att ached
4.
Electric plug, plugged in
5. Locking mechanism
Check
►
Check the visual wear / safety indicator.
It must be within the green /
+
area.
Att empt to lift :
►
To check, pull the handle upwards (1) without actuati ng
the safety catch (2).
The coupling head may not lift off the ball head.
►
Att ach the arrester/ safety cable (3) to the device or an
eye on the vehicle’s drawbar
►
Connect the electric plug (4) to the socket on the car’s
trailer coupling.
1
2
3
4
5
Uncoupling process
Uncoupling unbraked trailer
1.
Handle
2.
Safety catch
3.
Spherical cup
4.
Ball head
Unbraked trailer
►
Secure the trailer against rolling away.
►
Release the arrester cable from the ball head coupling.
►
Release the electric plug from the car socket.
►
Unlock the handle on the locking mechanism.
►
If applicable, lower the jockey wheel / support device.
►
Press the safety catch (2) all the way in.
►
Pull the handle (1) all the way up.
►
Lift the spherical cup from the ball head (4).
The trailer is uncoupled from the car.
2
3
4
1
Uncoupling braked trailer
1.
Handle
2.
Safety cable
3.
Spherical cup
4.
Ball head
Braked trailer
►
Secure the trailer against rolling away.
►
Apply the parking brake.
►
Release the safety cable (2) from the ball head coupling.
►
Release the electric plug from the car socket.
►
Unlock the handle on the locking mechanism.
►
Press the safety catch (if present) all the way in.
►
Pull the handle (1) all the way up.
►
Adjust / wind down the jockey wheel to lift the spherical
cup (3) from the ball head (4).
The trailer is uncoupled from the car.
3
4
1
2