Humidex
14
Most Common Issues
Mold, Mildew and Musty Smell
If mold or mildew is present prior to installing a Humidex, please have the contaminated area
cleaned. Not doing so could cause the Humidex to spread that mold to other locations in the
basement or crawlspace.
To avoid Mold, Mildew or Musty Smells:
-
Follow the Recommendations on
Page 13
(Concerning New Installations in the summer).
To ensure the proper functionality of the Humidex:
-
Verify that the replenishment air is flowing from the upstairs to the downstairs.
-
Increase ventilation in remote areas with a portable fan.
-
Any exposed pipes and ducts should be insulated.
-
Cinder block basement walls should be sealed with plastic vapor barrier or sealant.
-
Dirt floor in crawl space or basement should be covered with vapor barrier.
-
Sump pump should be equipped with a cover.
-
Rainwater from the roof should be directed away from the basement or foundation.
-
Landscaping should slope away from foundations.
-
Insulating basement will reduce the condensation and also reduce the energy cost during
heating season.
Do not attempt to service the Humidex yourself. If you are not sure about certain functions,
please
refer to Page 2.
