Roger Beep Tone
The Roger Beep is a tone which is automatically transmitted whenever
the PTT button is released. This lets the other person know that you are
finished transmitting your message.
To enable or disable the Roger Beep Tone:
1. Press the MENU button until the ( ) icon is flashing on the LCD screen.
2. Press the Up ( ) or Down ( ) button to enable (“
On
” will appear on
the LCD) or disable (“
OF
” will appear on the LCD screen) the Roger
Beep Tone feature. When enabled, the ( ) icon will appear on the
LCD screen.
3. To exit the Roger Beep Tone feature, press the PTT button once.
OR press the MENU button to proceed to other menu items.
OR Press the Compass button once to exit the program mode and
enter the compass mode.
Remark: The Roger Beep Tone will synchronize with the tone emitted on
the receiver side.
28
HUM1200 2/11/04 8:27 PM Page 28
