72
Low Battery Alarm
Low Battery Alarm
sounds when the input battery
voltage is equal to or less than the menu setting. The battery alarm will only sound
for the battery that is connected to the 300 Series
TM
Fishing System. The Low
Battery Alarm should be set to warn you when the battery voltage drops below the
safety margin that you have determined. For instance, if you are running a trolling
motor (battery operated), you would want to set the Low Battery Alarm to sound
before the battery voltage drops too low for it to be used to start your main,
gasoline-powered engine.
To change the Low Battery Alarm setting:
1. Highlight Low Battery Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery
Alarm setting. (Off, 8.5V - 13.5V, Default = Off)
Temp Alarm
Temp Alarm
sounds when the water temperature
detected by the 300 Series
TM
reaches the Temp Alarm setting, which is either set in
degrees Fahrenheit or Celsius
[International Models only]
. For example, if the Temp
Alarm is set to 58 degrees Fahrenheit, and the water temperature falls from 60 degrees
to 58 degrees, the Temp Alarm will sound. Similarly, if the water temperature rises from
56 degrees to 58 degrees, the Temp Alarm will also sound.
To change the Temp Alarm setting:
1. Highlight Temp Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Temp Alarm
setting. (Off, 33-120 [Fahrenheit], 0-50 [Celsius], Default = Off)
71
Depth Alarm
Depth Alarm
sounds when the depth becomes equal to
or less than the menu setting.
To change the Depth Alarm setting:
1. Highlight Depth Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm
setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters
[International Models Only]
,
Default = OFF)
Fish ID Alarm
Fish ID Alarm
sounds when the Fishing System
detects fish that correspond to the alarm setting. Fish ID Alarm will only sound if
Fish ID+
TM
is on.
To change the Fish ID Alarm setting:
1. Highlight Fish ID Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm
setting. (Off, All, Large/Medium, Large, Default = Off)
All
Large/Medium
Large
Off
For example, if you've set the Fish ID Alarm to sound for Large fish only,
the Fish ID alarm will sound when a large-sized fish is detected.
531448-1_A - 363_Man_Eng.qxd 11/9/2005 6:07 PM Page 78