manualshive.com logo in svg

Humminbird 515, Operation Manual

The Nokia 515 is a sleek and reliable mobile phone that captures timeless elegance. Stay connected with its user-friendly features and high-quality camera. To get the best out of your device, download the comprehensive and free User Manual from 88.208.23.73:8080, providing step-by-step guidance for all functions and features.

Share
Download
background image

33

Units - Speed 

Units - Speed 

(with T

(with T

emp/

emp/

Speed Only) 

Speed Only) 

Units - Speed

selects the units of measure for speed-related readouts, and will only

appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel
has moved at least once. 

To change the Units - Speed setting:

1.  Highlight Units - Speed on the Setup menu.

2.  Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Units - Speed

setting. (kph [

International Models Only

], mph, kts, Default = kph for

International models and mph for Domestic models)

User Mode 

User Mode 

User Mode

sets the menu system to either Normal or

Advanced. When set to Normal (default setting,) only the basic menu options are
shown.  When set to Advanced, additional menu choices are available. 

To change the User Mode setting:

1. Highlight User Mode on the Setup menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the User Mode setting.
(Normal, Advanced, Default = Normal)

Languag

Languag

e

e

(In

(In

t

t

erna

erna

tional Only) 

tional Only) 

Language

selects the display language for menus.

International Models Only. 

To change the Language setting:

1.  Highlight Language on the Setup menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Language

setting. (Default = English)

32

Units - Depth 

Units - Depth 

Units - Depth

selects the units of measure for all depth-

related readouts. 

To change the Units - Depth setting:

1.  Highlight Units - Depth on the Setup menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Units -

Depth setting. (Meters [

International Models Only

], Feet, Fathoms; Default

is Meters for International models, and Feet for Domestic models) 

Units - T

Units - T

emp 

emp 

(In

(In

t

t

erna

erna

tional

tional

Only)

Only)

Units - Temp

selects the units of measure for all temperature-related readouts.

International Models Only.

To change the Units - Temp setting:

1.  Highlight Units - Temp on the Setup menu.

2.  Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Units - Temp

setting. (Celsius, Fahrenheit; Default = Celsius) 

Units - Distanc

Units - Distanc

e 

e 

(with T

(with T

emp/

emp/

Speed Only) 

Speed Only) 

Units - Distance

selects the units of measure for all distance-related readouts, and

will only appear in the menu if a Temp/Speed Accessory is connected and the
paddlewheel has moved at least once. 

To change the Units - Distance setting:

1.  Highlight Units - Distance on the Setup menu.

2. Use the LEFT or RIGHT 4-Way Cursor Control keys to change the Units - Distance

setting. (Domestic Models: Statute Miles, Nautical Miles; Default = Statute Miles;
International Models: Meters/Kilometers, Meters/Nautical Miles, Feet/Statute
Miles, Feet/Nautical Miles; Default = Meters/Kilometers)

Summary of Contents for 515



























Reviews:

No comments

Related manuals for 515

Furuno TZT9 User Handbook Manual preview
TZT9
Brand: Furuno Pages: 16

Brands by name

Popular brands

Load more brands