background image

10

latitude/longitude coordinates of the cursor, are displayed at the bottom of the view. Pressing
the EXIT key moves the cursor back to the original position of the boat. 

Bird’s Eye View

Bird’s Eye View 

shows a 3D perspective view of the track from a point above and behind the

boat (the eye point). As the boat turns, the eye point moves to follow the boat. 

When you press the 4-WAY Cursor Control key in the

Bird’s Eye View, 

the position of the eye

point will shift. This allows you to move and turn the eye point so that you can look off to the
sides, or even behind the boat. Pressing the RIGHT or LEFT arrow keys on the 4-WAY Cursor
Control key turns the eye point right or left, while pressing the UP arrow key moves the eye point
forward, and pressing the DOWN Cursor key moves the eye point backward. 

Pressing the EXIT key moves the eye point back to its original position behind and above the boat.

Bird’s Eye View

Depth

Boat Icon

Water Surface

Temperature

Latitude and
Longitude
Position of Boat

Speed of Boat

Bearing of Boat
with Respect to
True North

Summary of Contents for 727





























































Reviews: