NMEA Output
(Advanced)
NMEA Output
turns the NMEA output on or off. This menu choice is available
only when in Advanced User Mode (see
Setup Menu Tab: User Mode
.)
The following NMEA sentences are output:
DPT - Depth
MTW - Water Temperature
GLL - Lat/Lon Position
GGA - GPS Fix Data
RMC - Recommended Minimum Specific GNSS Data
VTG - Course Over Ground and Ground Speed
ZDA - Time and Date
When navigating, the following NMEA sentences are also output:
APB - Autopilot Sentence B
BWR - Bearing and Distance to Waypoint
RMB - Recommended Minimum Navigation Info
To turn NMEA Output on or off:
1. Make sure you are in Advanced User Mode, then highlight NMEA
Output on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
NMEA Output to On or Off (Off, On, Default = Off).
Demonstration
Demonstration
deactivates the Demonstration
Mode feature (see
Powering Up the Unit
).
To turn Demonstration on or off:
1. Highlight Demonstration on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to turn
Demonstration On or Off (Off, On, Default = On).
76
531569-1_B - 955c ManE.qxp 3/4/2007 5:04 PM Page 76
