If you choose 12 or 24 local use the up/down arrows to select the number offset hours for your
region then press ENTER.
Note: If you do not know the UTC offset hours for your time zone, adjust the setting until the time
shown at the lower right of the display matches the current local time. Refer to section X.
Glossary for information on UTC.
Use the up/down arrows to adjust the setting.
UPDATE AVERAGING controls the rate at which time, position, speed , and course information
is displayed. On the fast setting, the display is updated once per second. On medium, the
information is updated every three seconds with speed and heading being averaged over the last
three seconds. The SLOW setting has a 5 second update and averaging. The MEDIUM or SLOW
setting is more appropriate for long trips, or on slower moving boats.
Note: The fast update averaging is not available when using Loran TD positions. (Refer to
section 1V. “Additional user set-up options”)
Use the up/down arrows to adjust the setting.
The NMEA adjustment is only necessary when additional navigational instruments are used with
your NS 10. When the NMEA 0183 output is turned on the NS 10 will provide the NMEA 0183
sentences every two seconds. (Refer to section 1X, NS 10 Interface Option)
Summary of Contents for NS 10
Page 1: ......
