Simulator Operation
The NS25 contains a Simulator mode that allows you to use the unit as if you are on the water
and learn how to operate many of the features. The Simulator location is in a detailed area of the
built-in map. It can be changed to an area you are familiar with, however, the most detailed area
is the default location. In Simulator mode, the unit saves all waypoints, routes, settings, and
changes.
Selecting the simulator option on the Start-Up screen after your power-up the unit enables the
simulator. When this screen is shown, simply press the DOWN ARROW to highlight “Simulator.”
When the screen times-out, the unit will be in simulator mode. To exit simulator mode, turn the
unit off.
Demonstration Operation
The NS25 has a demonstration function that works like the simulator. However, this operation is
only accessible if no GPS Receiver is detected. Settings and waypoints are not saved to unit
memory while in demonstration mode. To exit demonstration mode, turn the unit off.
Getting Started
As you begin using the NS25, there are some features in the set-up menu that you may want to
customize to set up the unit’s full functionality. For example, you may want to select and adjust
Units/Speed, Units/Distance, Time Format, Coordinates, or North Reference. See the Set-Up
section under “Using the Menu System” for more information.
