14
15
3.
4.
5.
Rest the cartridge on top of the rubber support and ensure the stylus tip is
submerged in the water.
Flip the device 180 degree if the user switches to the pressure gauge mode after
ultrasonic cleaning.
Touch the cleaning mode switch ( )
to start the cleaning for 20 seconds.
Use the drying pad for water
absorption, lift up and reposition
the tonearm on the turntable.
• Do not put foreign body, hot water, and any other forms of
liquid except water.
• Place the rubber support on the top of the water basin
before use. Do not allow the stylus tip resting on the base
of the water basin during the cleaning cycle. Failing to do so
may cause damage to the turntable stylus.
AVOID TOUCHING
THE BASE
Using Pressure Gauge
1.
3.
2.
Touch the ( ) to start the pressure
gauge mode.
Place the stylus cartridge on top of
the scale platform. Based on the
measurement, adjust the weight of
the tonearm accordingly.
Afterward, lift up and reposition the
tonearm on the turntable.
Notice: and
will be disabled for 5 seconds
after each ultrasonic cleaning cycle.
Notice: The stylus cantilever should not be leaned against the stylus rubber support.
Stylus Rubber
Support
