User Manual of Network Fisheye Camera
9
Figure 2-2
Connecting via a Switch or a Router
2.1.2
Detecting and Changing the IP Address
You need the IP address to visit the network camera.
Steps:
1.
To get the IP address, you can choose either of the following methods:
Use SADP, a software tool which can automatically detect the online
network cameras in the LAN and list the device information including IP
address, subnet mask, port number, device serial number, device version, etc.,
shown in Figure 2-3.
Use the iVMS-4200 client software to list the online devices. Please refer to
the user manual of iVMS-4200 client software for detailed information.
2.
Change the IP address and subnet mask to the same subnet as that of your
computer.
3.
Enter the IP address of network camera in the address field of the web browser to
view the live video.
Notes:
z
The default IP address is 192.0.0.64 and the port number is 8000. The default user
name is admin, and password is 12345.
z
For accessing the network camera from different subnets, please set the gateway
for the network camera after you logged in. For detailed information, please refer
to
Section 5.3.1 Configuring TCP/IP Settings.
