User Manual of Network Fisheye Camera
20
Figure 4-4
Setting a Preset
2.
Use the PTZ control buttons to move the lens to the desired position.
• Pan the camera to the right or left.
• Tilt the camera up or down.
• Zoom in or out.
3.
Click
to finish the setting of the current preset.
4.
You can click
to delete the preset.
Note
:
You can configure up to 128 presets.
z
Calling a Preset:
This feature enables the camera to point to a specified preset scene manually when an
event takes place.
For the defined preset, you can call it at any time to the desired preset scene.
In the PTZ control panel, select a defined preset from the list and click
to call the
preset.
Figure 4-5
Calling a Preset
