User Manual of Network Fisheye Camera
25
Figure 5-3
Time Sync by NTP Server
Note
:
If the camera is connected to a public network, you should use a NTP server
that has a time synchronization function, such as the server at the National Time
Center (IP Address: 210.72.145.44). If the camera is set in a customized network,
NTP software can be used to establish a NTP server for time synchronization.
Synchronizing Time Synchronization Manually
Enable the
Manual Time Sync
function and then click
to set the system time
from the pop-up calendar.
Note:
You can also check the
Sync with computer time
checkbox to synchronize the
time of the camera with that of your computer.
Figure 5-4
Time Sync Manually
z
Click the
DST
tab page to enable the DST function and Set the date of the DST
period.
Figure 5-5
DST Settings
2. Click
Save
to save the settings.
