User Manual of Network Fisheye Camera
60
z
To initialize and use the SD card after insert it to the camera, please refer to the
steps of NAS disk initialization.
6.2
Configuring Recording Schedule
Purpose:
There are two kinds of recording for the cameras: manual recording and scheduled
recording. For the manual recording, refer to
Section 4.3 Recording and Capturing
Pictures Manually
. In this section, you can follow the instructions to configure the
scheduled recording. By default, the record files of scheduled recording are stored in
the SD card (if supported) or in the network disk.
Steps:
1.
Enter the Record Schedule Settings interface:
Configuration > Advanced Configuration> Storage > Record Schedule
Figure 6-5
Recording Schedule Interface
2.
Check the checkbox of
Enable Record Schedule
to enable scheduled recording.
3.
Set the record parameters of the camera.
