102
Take the schedule timetable above as an example,
1 o’clock on Tuesday
has not
been colored in the schedule table, no action will be triggered during that hour.
Output Setting
The output mode affects the DO or relay out duration.
(i)
ON/Off Switch:
The camera triggers the external device and lasts for 10
seconds. Enable the
OnOff Switch
in
Output Setting
by clicking beside its
title. You can turn off the alarm manually by clicking “off” at the right
bottom of the
Select
Open
(N.O) or
Close
(N.C) for its sensor from
Normal Status
.
(ii)
Time Switch
: The camera triggers the external device and lasts for certain
time according to the internal setting, and the user is not allowed to break
off the alarm manually. Enable
Time Switch
by clicking beside the title, and
then adjust the
Normal Status
&
Interval
to your desired level.
Click on the
button to keep all the changes.
