RS485 SETUP
This function sets up the camera communication status when controlling the camera
through an external control device.
ADVANCED SETUP
VIDEO STANDARD
NTSC
SYNC
INT
SHARPNESS
-8 ---------- 8
RS485 SETUP
RETURN
APERTURE
-8 ---------- 8
VERSION (D25_4.3H.DD)
HIGH
RESOLUTION
OFF
BACKLIGHT
31
WDR True Day&Night Dome Camera
30
WDR True Day&Night Dome Camera
■
Advanced Page Menu
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an
authorized technician.
Problem
Nothing appears on
the screen.
The image on the
screen is dim.
• Check the power connections.
• Check the VIDEO signal line connection.
• Make sure the lens is clean. Clean the lens with a
soft clean lint free cloth.
• Adjust the monitor contrast & brightness controls.
• Re-position the camera if necessary.
The image on the
screen is dark.
• Adjust the contrast control of the monitor.
• If you have an intermediate device, set the 75
Ω
/ Hi-z
properly.
The camera is not working
properly, and the surface
of the camera is hot.
• Check that an appropriate power source is
connected to the camera.
The DAY/NIGHT menu
does not work.
• Check that AGC in the EXPOSURE menu is set
to 'OFF'.
The SENS-UP function
does not work.
• Check that AGC in the EXPOSURE menu is not
set to 'OFF'.
• Check that SHUTTER in the EXPOSURE menu
is not set to 'FLK' or 'MANUAL'.
Solution
Troubleshooting
■
RS485 SETUP
PREVIOUS PAGE
PROTOCOL :
BAUD RATE :
1 < 1 > 255
< 2400 >
< 4800 >
< 9600 >
< 19200 >
PELCO-D
CAMERA
# :
Summary of Contents for HTC-16GWD28D
Page 18: ...MEMO...
