1.3. Network reset
This procedure will erase all network data stored in the motor, including Network ID and Group assignments. It will not
clear the end limits. Completing a Network reset will prevent a PowerView® remote or App from operating the window
covering until it is reprogrammed.
2. Pairing a remote
A PowerView® remote can control up to 6 individual groups of blinds (buttons 1 to 6 at the top of the remote). The
instructions below assign a blind to group 1.
Release
the
manual control button
.
The end limits have been cleared.
1.3.1
Press and hold
the
manual control button
on the
motor for
12 seconds
.
The blind will jog 1x at 6 seconds and a second time at
12 seconds
1.3.2
Release
the
manual control button
after the
second jog. The Network ID and Group assignments
have been cleared.
The Network ID and Group assignments have
been cleared.
MANUAL
Page 4 of 22
version: 1.1
