INSTALLATION
10
■
Use a level to check that the mounting surface is level. Shim the brackets, if necessary.
Shims are not provided.
■
Hold the valance in position. Use a
3
∕
32
" drill bit to drill the screw holes through the valance
at mounting clip locations as marked.
■
Attach the mounting clip using the screws provided.
Warning:
Product is heavy. Mount into wood/metal studs or into concrete with
concrete anchors. Drywall anchors are not recommended.
■
Align and tighten the valance against the ceiling into its finished mounting position.
Install Valance Bracket Front Motor Mount Blinds — Outside Mount
■
Use a pencil to lightly mark the position of valance bracket placed in between each
installation bracket.
important:
The front edges of the installation brackets must be level and aligned to
each other.
■
Use a
3
∕
32
" drill bit to drill the screw holes.
Warning:
Product is heavy. Mount into wood/metal studs or into concrete with
concrete anchors. Drywall anchors are not recommended.
■
Use a level to check that the mounting surface is level. Shim the brackets, if necessary.
Shims are not provided.
■
Attach the valance brackets using the screws provided.
■
Loosen the wingnuts to slide the valance hangers out to allow for the valance to clear the
headrail and motor. Tighten wingnuts after adjustment.
Front Motor Mount
Valance
Bracket
Installation
Bracket
Summary of Contents for Specialty Motorized Vertical Blinds
Page 1: ...Installation Operation Care Vertical Blinds Specialty Motorized...
Page 22: ...Notes...
Page 23: ......