INSTALLATION
7
Single-Tiered Dust Cover Universal Round Corner
■
Install the round valance corners onto each end of the valance.
■
Install the valance returns onto each end of the round
valance corners.
■
Cut the fabric insert 4" longer than the total length of the
valance plus both returns.
notE:
Vinyl inserts should be cut flush with the ends of the
valance returns. Secure vinyl in place with the valance return clips.
■
Place the fabric insert into the clear lips of the valance,
continuing around the molded valance corner and through
the valance return.
■
Wrap excess fabric around the end of the valance return and
secure it with a valance return clip.
■
Pull the fabric tight from the other end of the fabric insert, then
repeat the previous two steps.
■
Attach the clear corner caps onto the valance corners, top and bottom.
■
Use a (#4) ½" screw to secure each valance return onto the valance dust cover surface.
For inside mount blinds, proceed to “Install Mounting Clips (and Assembled Valance) —
Inside Mount” on page 9. For outside mount blinds, proceed to “Install Valance Bracket
Front Motor Mount Blinds — Outside Mount” on page 10.
Round Valance
Corner
Valance
Return
Valance
Fabric
Insert
Clear Corner
Caps
Valance
Return Clip
Summary of Contents for Specialty Motorized Vertical Blinds
Page 1: ...Installation Operation Care Vertical Blinds Specialty Motorized...
Page 22: ...Notes...
Page 23: ......
