Hunter Pacific International – www.hunterpacific.com.au
Fan Owner Warranty & Operations Manual
4) Summer/Winter
Switch
Operation
The location of the Summer and Winter switch is different from fan to fan. On most Hunter Pacific
ceiling fans you should be able to locate the summer/winter switch above the motor housing (figure 1).
On the Hunter Pacific pull cord fans you will find the switch located on the pull cord assembly kit
(figure 2).
Reversing Switch
Pull Cord
Assembly Kit
FIG 1
FIG 2
Understanding the reversing switch
Ceiling fans are an environmentally smart choice to assist
with cooling and warming your home.
In Summer your fan should be set to Summer mode. Your
ceiling fan will spin to push air down the centre of the fan
producing a cooling breeze.
Air is blown down,
producing a cool breeze
.
NOTE: The summer/winter switch must always be locked into one of the two position for the fan
to operate. Always check the switch is locked into its correct position after cleaning. If the switch
is placed between positions, the fan will not work.
An upward airflow will push warm
air off the ceiling and circulate it
downwards
In Winter mode your ceiling fan will spin the opposite
direction. Air is drawn up the centre of the fan, and pushed
along the ceiling to circulate down to the living areas. Your
fan should be operated on slower speeds in Winter than
Summer. The Winter mode can also be for air circulation in a
poorly ventilated rooms.
CAUTION: Always ensure the fan is off and the blades have stopped spinning
before attempting to reverse the fan.
5