Assembly Steps
3. Install the mudguard
Put the left handle and the right
handle inserted into the mudguard
respectively .
4. Install the shockproof sleeve.
As shown in the picture,Install the
front and back shockproof
sleeves,and fasten with the screws.
5. Install the head cover.
Remove the bolt from the head cover.
Install the head cover to the
corresponding place,and fasten with
the bolts.
Put the wire plug through the
threading holes.
FOR CUSTOMER SERVICE ENQUIRIES & SPARE PARTS
PLEASE CONTACT
HUNTER PRODUCTS TOLL FREE 1800 224 094
OR VISIT WWW.ELECTRICRIDEON.COM.AU
-6-