Fire Bricks & Baffle
The Fire Bricks, in this appliance, are factory fitted. The following set of photos show the removal
sequence that you will need to employ when servicing your Hunter stove.
Side Bricks
Rear Brick
Baffle
To assemble, simply reverse the above procedure.
Remove all of the Riddling Bars, Cam Bar,
Catch Bar and Ashpan.
Slide the Side Brick toward the front of the
Stove and pull the bottom edge into the
Lift up the Side Plates and remove from
Stove.
Pull the top edge of the Rear Brick towards
you and lift out of the Stove.
Lift the Baffle and slide it to the left. When
the right side of the Baffle clears the Baffle
Support lower it into the Stove and
remove.