2
JINTDBW09 Rev B 05/03/15
CONTENTS INDEX:
TECHNICAL SPECIFICATION………………………………………………………………………………………………
3
IMPORTANT INFORMATION…………………………………………………………………………………………….
4
REMOVING INTERNAL COMPONENTS………………………………………………………………………………
6
APPLIANCE DIMENSIONS ………………………………………………………………………………………………
7
PRE INSTALLATION REQUIREMENTS………………………………………………………………………………….
8
INSTALLATION INSTRUCTIONS…………………………………………………………………………………………
11
INSTALLATION OF HEATING & HOT WATER…………………………………………………………………………….
13
COMMISSIONING AND HANDOVER…………………………………………………………………………………..
15
OPERATING INSTRUCTIONS………………………………………………………………………………………………
16
MAINTENANCE & SERVICING…………………………………..………………………………………………………..
19
SPARES INFORMATION………………………………………………………………………………………………………
21
COMMISSIONING & INSTALLATION CHECK LIST……………..……………….………………………………..
24
SERVICE RECORDS……………………………………………………………………………………………………………..
25
Hunter Stoves,
Emperor Way,
Exeter Business Park,
Exeter,
Devon. EX1 3QS
Email
W
ARRANTY
Hunter Stoves appliances come with a standard 2 year warranty; however this excludes naturally
wearing “consumable” components and the use of un-authorised fuels.
Consumables are deemed to be; Glass, Seals, Gaskets, Grate Components, Log Retainers, Baffles,
Thermostat and the surface finish of the appliance.
The Warranty will only be valid if the appliance is installed by an appropriately qualified engineer in
accordance with the manufacturer’s instructions and to the appropriate Building Regulations and/or
Local By-Laws and serviced within 12 months of installation.
Hunter Stoves will also support an extended 5 year warranty on external Cast Iron components such
as Doors, Flue Collars and Covers.
If this appliance is purchased through an un-authorised stockist or an internet trader Hunter Stoves
are only obliged to support the statutory requirements.
This appliance must be regularly serviced and maintained, using only Hunter Stoves approved
components for the Warranty to be valid
