11
42700-01 • 01/15/08 • Hunter Fan Company
7-6. Using the large wire connectors, connect the fan and receiver to
the power wires as follows:
• Connect the white wire (A/C IN) from the receiver to the white
wire from the ceiling.
• Connect the black wire from the receiver to the black wire from
the ceiling.
CAUTION:
Be sure no bare wire or wire strands are visible after
making connections.
7-7. Run the thin white antenna wire from the receiver through one
of the slots in the ceiling plate. (For best reception, make sure the
end of the antenna is exposed at the top of the canopy.)
7-8. Connect the green ground wires from the ceiling plate and the
downrod to the ground wire from the ceiling.
7-9.
Push all wires and wire connectors back through the ceiling plate
hole into the outlet box. Place the green and white wires on a
separate side of the outlet box from the other wires.
