11
41979-01 • 08/07/07 • Hunter Fan Company
7-1. Attach each blade to the blade iron and medallion using the three
blade assembly screws. Insert the assembly screws into the blade
iron, through the blade and into the medallion, with the blade
captured between the blade iron and medallion. The blades may
appear slightly loose after screws are tightened. This is normal.
7-2. Some blade mounting screws are installed in the motor to
secure shipping blocks. Remove the blade mountings screws and
shipping blocks from the motor. Save the screws and discard the
shipping blocks.
7-3. For each blade, insert one blade mounting screw through the
blade iron, and attach lightly to the fan. Insert the second blade
mounting screw, then securely tighten both mounting screws.
Blade
Assembly
Screw
Blade
Mounting
Screw
Steps 7-1 – 7-3
Medallion
7 • Assembling the Blades
