6
41979-01 • 08/07/07 • Hunter Fan Company
3 • Assembling and Hanging the Fan
Step 3-5
U-shaped
Hole
3-1. Insert the downrod through the canopy, spindle, and canopy trim
ring. Feed the wires from the fan through the downrod.
3-2. Screw the downrod into the fan assembly.
CAUTION:
The adapter has a special coating on the threads. Do
not remove this coating; the coating prevents the downrod from
unscrewing. Once assembled, do not remove the downrod.
3-3. Raise the spindle to expose the allen head set screw on the
adapter. Tighten the allen head set screw on the adapter using the
included allen wrench.
3-4. Lower the spindle onto the motor housing. Tighten the allen head
set screw on the spindle using the included allen wrench.
3-5. Raise the fan and place the hook on the ceiling plate through the
U-shaped hole in the rim.
WARNING:
Fan may fall if not assembled as directed in these
installation instructions.
Downrod
Allen Head
Set Screw
Step 3-1
Canopy
Trim Ring
Canopy
Spindle
Set Screw
Step 3-3
Spindle
Step 3-4
Allen Head
Set Screw
