2
©2010 Hunter Fan Co.
43095-01 20100615
Introduction .................................................... 2
Safety Instructions ......................................... 3
Using Your Auto Duster ................................. 3
How the Auto Duster System works .............. 4
Operating Your Auto Duster ........................... 4
Filter Replacement ........................................ 5
Cleaning ........................................................ 5
Troubleshooting ............................................. 6
Filter Ordering................................................ 6
Technical Support .......................................... 6
Warranty ........................................................ 6
Table of Contents
Thank you for purchasing the Auto Duster
dust removal system from Hunter Fan
Company. You have purchased our latest
development in portable home comfort. This
system has been developed to improve the
quality of the air you breathe.
The Auto Duster System air is pulled in
through the front right grill and cleaned
across the Auto Duster filter. Clean air is then
released out the front left grill in order to avoid
stirring up settled particles.
The following innovative features are included
in your Hunter Auto Duster.
•
Dust Removal Efficiency
: The Auto Duster
filter will remove up to 80% of airborne dust
particles in your homes air before it lands on
furniture.
InTroduCTIon
1. The Auto Duster Unit is designed for use
on a flat, level surface and may not work
properly on an uneven surface. ALWAYS
place this Auto Duster on a firm, level
surface. ALWAYS place the Auto Duster at
least six (6) inches away from walls and
three (3) Ft. from heat sources such as
stoves, radiators, or heaters.
2. Place the Auto Duster in an area that is out
of the reach of children.
3. Before using the Auto Duster, extend the
cord and inspect for any signs of damage.
DO NOT use the product if the cord has
been damaged.
4. To reduce the risk of electric shock, this
product has a polarized plug (one blade is
wider than the other) as a safety feature.
This plug will fit into a polarized outlet only
one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. DO
NOT attempt to defeat or override this
safety feature.
5. ALWAYS UNPLUG the Auto Duster when it
is not in operation, while the filter is being
changed, and while it is being cleaned.
6. DO NOT tilt or move the Auto Duster while
it is in operation. Shut off and unplug
before moving.
7. DO NOT immerse the Auto Duster in water
as permanent damage will occur. Refer to
and follow the CLEANING AND FILTER
REPLACEMENT instructions.
Save These Important Instructions
SafeTy InSTruCTIonS
