Hunter 42015-01, Installating And Operation Manual

6

Hunter Fan Company 

42015-01 • 02/15/05 

7

42015-01 • 02/15/05 

Hunter Fan Company

3 • Assembling and Hanging the Fan

You can assemble your fan for 

standard

 or 

angle 

mounting as shown 

in steps 3-1 – 3-6.  
3-1.  Remove the label from the standard mounting washer inside the 

canopy. Leave the washer in place. 

3-2.  To assemble fan to hang down from a flat or angled ceiling, place 

the canopy with washer, and canopy trim ring around the adapter 
so that they rest on the fan assembly. 

3-3.  Feed the wires from the fan through the downrod.
3-4.  Screw the downrod into the fan assembly. Tighten the allen head 

set screw using the included allen wrench.

CAUTION:

 e downrod has a special coating on the threads. 

Do not remove this coating; the coating prevents the downrod from 
unscrewing. Once assembled, do not remove the downrod.

WARNING:

  Do not carry or lift fan by canopy.

3-5.  Raise the fan and place the ball into the hanger bracket. 
3-6.  Align the notch on the ball with the indent in the hanger bracket. 

(Rotate the fan until you hear the notch pop into place.) 

WARNING:

  Fan may fall if not assembled as directed in these 

installation instructions.

Steps 3-5 – 3-6

Indent

Steps 3-2 – 3-4

Downrod 

Canopy

 (with Washer)

Canopy 

Trim Ring

Set Screw

Canopy

Standard 

Mounting 

Washer

Step 3-1

Adapter

Label