background image

12

Hunter Fan Company 

42503-01 • 02/08/06

13

42503-01 • 02/08/06 

Hunter Fan Compan

Hunter fans have the power to cut your cooling costs up to 40%. 

Beat the High Cost of Cooling 

 e air movement created by a Hunter ceiling fan lets you set your 
thermostat higher and still stay comfortable. Every degree you 
raise the thermostat saves up to 7% on energy costs. So, you can 
cut back on expensive air conditioning...and save up to 40%* on 
cooling. In winter, your Hunter fan recirculates warm air and saves 
up to 10%* on heating bills.

* On average at low speed settings. Your savings may vary based 
on climate, building type and thermostat setting. 

Save Energy and Money While Protecting the Environment 

Congratulations! You’re saving energy and money while protecting 
the environment by purchasing this ENERGY STAR qualifi ed 
Hunter ceiling fan! With this purchase, you are doing your part to 
protect the environment. In 2010, ENERGY STAR qualifi ed ceiling 
fans are projected to cut air pollution by more than 500 million 
pounds! 

Your new ceiling fan has earned the ENERGY STAR label 
because it meets high energy effi  ciency specifi cations set by 
the Environmental Protection Agency (EPA). ENERGY STAR 
labeled ceiling fans save energy because they have more effi  cient 
fan motors and air delivery due to more aerodynamic blade 
confi gurations. Ceiling fan models bearing the ENERGY STAR label 
move air 14 - 20% more effi  ciently than typical ceiling fan models. 
For more information on ENERGY STAR visit www.energystar.gov.

Summary of Contents for 42503-01















Reviews: