2
45041-01 • 09/30/09 • Hunter Fan Company
Table of Contents
1 • Getting Ready
...................................................4
2 • Installing the Ceiling Plate
..........................5
3 • Assembling the Fan
.......................................6
4 • Hanging and Wiring the Fan
.....................7
5 • Installing the Canopy and Canopy
Trim Ring
..............................................................8
6 • Assembling the Blades
.................................
9
7 • Completing Your Installation With
or Without a Light Fixture
....................... 10
8 • Operating and Cleaning
Your Ceiling Fan
............................................. 14
9 • Troubleshooting
........................................... 15
© 2009 Hunter Fan Company
Your new Hunter
®
ceiling fan is an addition to your home or office that
will provide comfort and performance for many years. This installation
and operation manual gives you complete instructions for installing
and operating your fan.
We are proud of our work. We appreciate the opportunity to supply
you with the best ceiling fan available anywhere in the world.
Before installing your fan, for your records and warranty assistance,
record information from the carton and Hunter nameplate label
(located on the top of the fan motor housing).
Cautions and Warnings
•
READ THIS ENTIRE MANUAL CAREFULLY BEFORE BEGINNING
INSTALLATION. SAVE THESE INSTRUCTIONS.
• Use only Hunter replacement parts.
• To reduce the risk of personal injury, attach the fan directly to the
support structure of the building according to these instructions,
and use only the hardware supplied.
• To avoid possible electrical shock, before installing your fan,
disconnect the power by turning off the circuit breakers to the
outlet box and associated wall switch location. If you cannot lock
the circuit breakers in the off position, securely fasten a prominent
warning device, such as a tag, to the service panel.
• All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualified electrician.
• To reduce the risk of personal injury, do not bend the blade
attachment system when installing, balancing, or cleaning the fan.
Never insert foreign objects between rotating fan blades.
• To reduce the risk of fire, electrical shock, or motor damage, do not
use a solid-state speed control with this fan. Use only Hunter speed
controls.
Welcome
