44119-01 • 10/10/2012
©2012 Hunter Fan Company
10
Setting your Schedule
Read the scheduling section thoroughly to ensure you understand your scheduling
options and which will best fit with your lifestyle. The following notes should help you
with scheduling:
* The schedule time can be set in 15 minute increments, and remains the same for both
Heat and Cool programs.
* The scheduled temperature can be set in increments of 1°F (1°C).
* After 10 minute without a key press, the thermostat will return to the home display
screen.
* When setting the schedule time, note the AM / PM indicator.
* At any stage during your scheduling, you can use the
Back
or
Next
buttons to move
forward or backwards through the steps.
Home/
Done
will save any changes, even if you
have not scheduled or altered all settings.
* Arrows beside each schedule mode and beside heat/cool modes will indicate which
ones are active.
* This thermostat has been pre-programmed to provide optimal energy savings. No
programming is necessary. We recommend you run these programs for a few days
before adjusting your programming. If it is necessary to change these settings, use
the scheduling table on the next page to record your new settings. You will also find
the default schedule there as well.
Summary of Contents for 47905
Page 55: ... 2012 Hunter Fan Company 55 ...
