www.HunterFan.com
1.888.830.1326
M0047-01 • 11/26/12 •
© Hunter Fan Company
13
Troubleshooting
Excessive wobbling
•
Tighten all of the blade and
blade iron screws until they
are snug.
•
Use the provided balancing
kit and instructions to balance
the fan.
Noisy Operation
•
Tighten the blade and blade
iron screws until they are snug.
•
Check to see if any of the
blades are cracked. If so, replace
all of the blades.
Fan doesn’t work
•
Make sure power switch is on.
•
Pull the pull chain to make sure
it is on.
•
Push the motor reversing switch
rmly left or right to ensure that
it is engaged.
•
Check the circuit breaker to
ensure the power is turned on.
•
Make sure the blades spin freely.
•
Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 7.
•
Check the plug connection in
the switch housing.
