Hunter 5954-C54CFLK Instructions Manual Download

Page: 12 / 17

www.HunterFan.com

1.888.830.1326

Light Kit

Make sure the lower switch housing is securely attached

to the upper switch housing. Failure to properly secure all

three assembly screws could result in the light fixture falling.

Partially install two of the switch housing

screws found in the hardware bag. Connect

the plugs from the upper and lower switch

housings. Make sure to line up the colored

markings on the connectors.

Align the notches in the sides of the lower

switch housing with the upper switch

housing screws. Lift the lower switch housing.

Twist the lower switch housing clockwise to

lock into place. Then thread the fan pull chain

through the hole in the light kit.

Install the third switch housing screw.

Tighten all three screws securely.

Switch

Housing

Screw

Switch

Housing

Screw

Notch

Want to install your fan without a light kit?

Go to www.HunterFan.com/FAQs and click

“How do I install my fan without the light kit?”

Summary of Contents for 5954-C54CFLK


















Search results

Summary of Contents for 5954-C54CFLK

Reviews:

Related manuals for 5954-C54CFLK

Brands by name

Popular brands

Hunter 5954-C54CFLK, Instructions Manual

Search results

Summary of Contents for 5954-C54CFLK

Reviews:

Related manuals for 5954-C54CFLK

Brands by name

Popular brands