Hunter 90436, Owner'S Manual

5

  44096-01   20130220 

©2013 Hunter Fan Co.

FUSED PLUG

This plug is a safety feature. It contains a safety 

device (fuse) that should not be removed. Discard 

product if the attachment plug is damaged. To 

reduce the risk of fire, electric shock and personal 

injury, DO NOT remove, replace, repair or tamper 

with the originally supplied plug. If the Fan does 

not function properly, it may be due to the safety 

device incorporated in this plug.              
If the fuse fails, it is generally due to a short circuit 

or circuit overload. Replace the fuse as per the 

instructions below. If the replacement fuse fails, 

immediately unplug the unit and contact our 

technical support department for assistance. 

Fuse Replacement: 

1. To replace the fuse, first turn the unit it off and 

unplug it from the wall. Locate the door on top 

of the plug. Figure 1.

2. Slide the door on top of the plug towards the 

blades. Figure 2.

3. Carefully remove the fuse from the clips holding 

it on the top and bottom. Figure 3.

Warning! Electrical Hazard!

 Only replace 

with a fuse type and rating matching what was 

removed from the product. If the product fails a 

second time, immediately unplug it and contact our 

technical support at 1-888-830-1326.
4. Gently push the fuse back into the pins that will 

hold it in place.

Note:

 If the fuse is not seated properly, the unit 

will not function.

5. Slide the Door back over the fuse box in the plug.
6. Plug the fan back in and resume use.

Figure 1.

Figure 2.

Figure 3.