background image

WARRANTY

following limited warranty to the user
or consumer purchaser of this Hunter
Portable fan:

fails at any time within five years after
the date of sale to you due to a defect
in material or workmanship, labor
to repair the defect will be provided
free of charge at our nearest service
center or our Service Department

be responsible for labor costs after

limited warranty applies only to the
motor itself, and does not apply to
electronic controls such as remote
controls, remote control receivers or
transmitters used in conjunction with
the motor. These electronic control
items are included in the one year

If any part of your Hunter Portable
Fan other than the motor fails at any

sale to you due to a defect in material
or workmanship, we will repair or, at
our option, replace the defective part
free of charge for parts and labor
performed at our nearest service
center or at our Service Department

IF THE USER OR CONSUMER
PURCHASER CEASES TO OWN THE
FAN, THIS WARRANTY AND ANY
IMPLIED WARRANTY WHICH THEN
REMAINS IN EFFECT, INCLUDING
BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY

PURPOSE,

ARE

VOIDED.

NO

WARRANTY, EXPRESSED OR IMPLIED,
INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, IS MADE
IN RESPECT TO THE GLASS GLOBES
OR LIGHT BULBS OR THE FINISH
ON ANY METAL PORTION OF THE
FAN. THIS WARRANTY IS IN LIEU OF
ALL OTHER EXPRESS WARRANTIES.
THE DURATION OF ANY IMPLIED
WARRANTY,

INCLUDING,

BUT

WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR
PURPOSE, IN RESPECT TO ANY
HUNTER FAN MOTOR OR OTHER
FAN PART, IS EXPRESSLY LIMITED
TO THE PERIOD OF THE EXPRESS
WARRANTY SET FORTH ABOVE FOR
SUCH MOTORS AND OTHER PARTS.

This warranty is voided if your
Hunter Fan is not purchased and
used in the USA.

This warranty excludes and does
not cover defects, malfunctions or
failures of any Hunter Portable fan
which were caused by repairs by
persons not authorized by us, use of
parts or accessories not authorized
by

us,

mishandling,

improper

installation,

modifications,

or

damage to the Hunter Portable
fan while in your possession,
or unreasonable use, including
failure to provide reasonable and
necessary maintenance.

To obtain servicing, contact the
nearest Hunter authorized service

OR FITNESS FOR A PARTICULAR

center or the Hunter Home Comfort

NOT LIMITED TO ANY IMPLIED

11

Hunter Home Comfort makes the

If your Hunter Portable Fan motor

time within one year after the date of 

limited warranty below.

this five-year period. The foregoing

in Kennesaw, Georgia.

in   Kennesaw,  Georgia. You will

61809-01   R20211020

Summary of Contents for 90600













Reviews: