MA011-01 • 09/26/13
1.888.830.1326
3
If your fan’s switch housing cap resembles
this one, remove the whole switch
housing by removing the switch housing
screws with a Phillips head screwdriver.
Remove the two cap screws from the
inside of the switch housing. Reinstall
the switch housing. Tighten the switch
housing screws. Then follow the
TYPE-A
ASSEMBLY INSTRUCTIONS
on pages 4-5
.
If your fan’s switch housing cap
resembles this one, remove the cap
screws with a Phillips head screwdriver.
Then follow the
TYPE-A ASSEMBLY
INSTRUCTIONS
on pages 4-5.
Switch
Housing
Cap
Cap
Screw
WHICH ASSEMBLY METHOD WILL I USE?
Switch
Housing
Cap
Switch
Housing
Screw
If your fan’s switch housing cap resembles
this one, remove the whole switch
housing by removing the switch housing
screws with a Phillips head screwdriver.
Remove the plug button using a standard
screwdriver. Then follow the
TYPE-C
ASSEMBLY INSTRUCTIONS
on pages 8-9.
Switch
Housing
Screw
Plug
Button
If your fan’s switch housing cap
resembles this one, remove the whole
switch housing by removing the switch
housing screws with a Phillips head
screwdriver. Remove the plug button.
Then follow the
TYPE-B ASSEMBLY
INSTRUCTIONS
on pages 6-7.
Switch
Housing
Screw
Plug
Button
Choose one of the four images below that most closely resembles the switch
housing on your fan; then follow the instructions under the image.
