41722-01 09/09/2011
19
E7
N
E5
M
Align glass and push up.
Trouble Shooting
Problem:
Fan does not come on.
Solution:
• Hunter Fan Bath Ventilators are extremely quiet. To
confirm that the fan is running, place your hand near
the vents to feel the air movement.
• Turn power on, replace fuse, or reset breaker.
• Check all plug connections to be sure they are secure.
• Check the wiring to make sure it matches the wiring
diagram.
Problem:
Light does not come on.
Solution:
• Replace the light bulb with a new bulb.
• Turn power on, replace fuse, or reset breaker.
• Check all plug connections to be sure they are secure.
• Check the wiring to make sure it matches the
wiring diagram.
Problem:
Fan is noisy.
Solution:
• Check and tighten all fasteners.
• Check the glass to make sure it is secure.
• Check the flapper to make sure it moves freely.
If you need parts or service assistance, please
call 888-830-1326 or visit us at our WEB site at
http://www.hunterfan.com.
Install 2 Max 60 Watt A-15 bulbs (Not Included)
and 1 Max 7 Watt C-7 bulb (Not Included).
E6
L
Slide light mount over posts and attach thumbscrews.
WARNING: To reduce the risk of electrical shock, all 4
thumbscrews MUST be properly installed.
