Hunter HEPAtech 30772, Owner'S Manual

©2011 Hunter Fan Co.

3

USING YOUR AIR PURIFIER

1. This Air Purifier is designed for use on 

a flat, level surface and may not work 

properly on an uneven surface. ALWAYS 

place this Air Purifier on a firm, level 

surface. ALWAYS place the Air Purifier at 

least six (6) inches away from walls and 

three (3) Ft. from heat sources such as 

stoves, radiators, or heaters.

2. Place the Air Purifier in an area that is out 

of the reach of children.

3. Before using the Air Purifier, extend the 

cord and inspect for any signs of damage. 

DO NOT use the product if the cord has 

been damaged.

4. To reduce the risk of electric shock, this 

product has a polarized plug (one blade is 

wider than the other) as a safety feature. 

This plug will fit into a polarized outlet only 

one way. If the plug does not fit fully into 

the outlet, reverse the plug. If it still does 

not fit, contact a qualified electrician. DO 

NOT attempt to defeat or override this 

safety feature.

5. ALWAYS UNPLUG the Air Purifier when it 

is not in operation, while the filter is being 

changed, and while it is being cleaned.

6. DO NOT tilt or move the Air Purifier while it 

is in operation. Shut off and unplug before 

moving.

7. DO NOT immerse the Air Purifier in water 

as permanent damage will occur. Refer to 

and follow the CLEANING AND FILTER 

REPLACEMENT instructions.

8. DO NOT run the ionizer if tobacco smoke, 

air fresheners, dripless wax candles, or 

grease from cooking is present. 

 Save These Important Instructions

SAFETY INSTRUCTIONS

1. Take the air purifier out of the box and 

remove the clear plastic protective bag and 

place the unit on a firm level surface.

2. Before turning on the air purifier, you 

need to confirm that the filters are firmly in 

place and have not become loose during 

shipping. To check the filters, open the front 

grill by grabbing the handle with the Hunter 

Logo and gently pull forward, then lift the 

door from the unit.

3. The carbon pre-filter is mounted inside the 

front of the unit with hook tape. Confirm 

that it properly covers the grill vents. You 

may notice a few black particles coming off 

the pre-filter. Those particles are part of the 

odor-removing activated carbon and will be 

collected on the filter during use. 

4. The HEPAtech

®

 filter will be resting inside 

the unit. If present, remove the plastic bag 

surrounding the filter and place the filter 

back into the Air Purifier. The  filter should 

have arrows on the side to indicate air flow 

and the direction the filter should be placed 

back into the unit.

Figure 1.