4
81601-01 R20140228
11. To prevent a possible fire, do not block air intakes or exhaust in
any manner. Do not use on soft surfaces, like a bed, where openings
may become blocked.
12. A heater has hot and arcing or sparking parts inside. Do not use it
in areas where gasoline, paint, or flammable liquids are used or
stored.
13. Use this heater only as described in this manual. Any other use
not recommended by the manufacturer may cause fire, electric
shock, injury to persons, or other damage to property.
14. Ensure the heater is on a stable, secure surface to eliminate the
potential of tipping it over.
15. To prevent overload and blown fuses, be sure that no other
appliance is plugged into the same outlet (receptacle) or into another
outlet (receptacle) wired into the same circuit.
16. It is normal for the heater’s plug and cord to feel warm to the
touch. A plug or cord which becomes hot to the touch or becomes
distorted in shape may be a result of a worn electrical outlet. Worn
outlets or receptacles should be replaced prior to further use of the
heater. Plugging heater into a worn outlet/receptacle may result in
overheating of the power cord or fire.
17. Always plug heaters directly into a wall outlet/receptacle. Never
use with an extension cord or relocatable power tap (outlet/power
strip).
18. Check your heater cord and plug connections. A loose fitting
outlet can cause the plug to overheat or cause a fire. Be sure plug fits
tight in the outlet. Check frequently during use to make sure plug and
outlet are not hot. If so, discontinue using heater and have outlet
replaced by a qualified electrician.
19. Note: Heaters draw more current than small appliances,
overheating of the outlet may occur even if it has not occurred with
the other appliances.
20. Check that neither the appliance nor the power cable has been
damaged in any way during transportation.
21. Make sure that no pieces of polystyrene or other packaging
material have been left between elements of the appliance. It may be
necessary to clean the appliance.
22. Connect to properly polarized outlets only.
23. This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug is intended to fit
in a polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety feature.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
DANGER-HIGH TEMPERATURES MAY BE GENERATED
UNDER CERTAIN ABNORMAL CONDITION. DO NOT
PARTIALLY OR FULLY COVER OR OBSTRUCT THE
FRONT OF THIS HEATER.
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
