Top View of Fixture
If you are going to install more than one Illumi-Heat in your home, then you will need to assign
each unit a its own unique Transmitter / Receiver Code.
1) Looking at the fixture from its top, locate the Receiver, as shown in Figure 1.
Figure 1 - Receiver
2) On the Receiver you will see the four switches that you will use to set the code for the
Transmitter and the Receiver. See Figure 2.
ON DIP
ON DIP
Figure 2 - Receiver Code Switches
Switches
NOTE - All Switches are
shown in the ON position
ON DIP
Receiver
(Bracket cut away
for clarity.)
4
43566-01 • 06/25/10 • Hunter Fan Company
Pre-Installation for Multiple Illumi-Heat Units in Your Home