1.888.830.1326
www.HunterFan.com
Ceiling Bracket (continued)
For angled ceilings, point
opening toward peak.
Refer to warning w.1 on pg. 2
To avoid possible electrical shock, before
installing your fan, disconnect the power by
turning off the circuit breakers to the outlet
box associated with the wall switch location.
If you are unable to do this,
call Technical Support at
1-888-830-1326.
6
Use wood screws
(included)
and washers when securing
to support structure with
approved electrical outlet
box. Drill 9/64” pilot holes in
support structure to aid in
securing ceiling bracket with
hardware found in
the hardware bag.
Use machine screws
(provided with outlet
box) and washers when
securing to existing ceiling
fan-rated outlet box. Make
sure it is securely installed
and is acceptable for fan
support of 31.8 kg (70 lbs)
or less.
Use the wood screw to poke holes through
the rubber gasket in order to install the
ceiling bracket assembly to your support
structure or ceiling fan-rated outlet box.
M0035-01 • 05/28/13 • © Hunter Fan Company
