background image

10

41481-01   10-5-2001

®

with the same orientation.  Once removed, the used filter can be
discarded.

3.

Remove the new filter from its wrapping and look at the orientation
of the rubber seals on the sides of the filter.  The loose ends of the
flaps should be facing out as the filter is placed into the air purifier.
Press firmly on the filter frame to ensure that the filter is fully inserted
into the housing. Mark the new filter installation sticker included
with the filter and place the sticker on the front grille for future
reference.

4.

Install the front grille onto the unit and plug in the air purifier.

5.

For Models 36144, 36145, 36259, 36260, 36394, 36395:  Reset the
filter counter as described in the Pre-filter and Filter Counter section
of this manual.

REPLACEMENT FILTERS:

To obtain replacement filters for your Air Purifier, contact your local retailer
where the unit was purchased.  Please be prepared to tell the retailer the
model number of your air purifier and the model number of your
replacement filters that are listed below.  The model number of your air
purifier is located on the rating sticker on the back of the unit.  The
replacement filter model numbers are listed in the table below.

Air Purifier
Model No.

Pre-filter
Model No.

HEPA Filter
Model No.

36114

36115
36144
36145

36259
36260

36394
36395

30907

30903

30907

30938

30940

English

Summary of Contents for QuietFlo 36114













Reviews: