background image

2

41481-01   10-5-2001

®

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THIS AIR PURIFIER.

1.

This Air Purifier is designed for use on a flat, level surface and
may not work properly on an uneven surface. ALWAYS place
this Air Purifier on a firm, level surface. ALWAYS place the Air
Purifier at least six (6) inches away from walls and heat sources
such as stoves, radiators, or heaters.

2.

Place the Air Purifier in an area that is out of the reach of
children.

3.

Before using the Air Purifier, extend the cord and inspect for
any signs of damage. If the supply cord is damaged, it must be
replaced by a manufacturer or its service agent or similarly
qualified person in order to avoid hazard.

4.

If  the plug does not fit fully and securely into the outlet,  reverse
the plug.  If it still does not fit, contact a qualified electrician.
DO NOT attempt to use the unit unless the plug fits securely
into the socket.

5. ALWAYS UNPLUG the Air Purifier when it is not in operation,

while the filter is being changed, or while it is being cleaned.

6. DO NOT tilt or move the Air Purifier while it is in operation.

Shut off and unplug before moving.

7. DO NOT immerse the Air Purifier in water, as permanent

damage will occur. Refer to and follow the AIR PURIFIER
MAINTENANCE instructions.

READ AND SAVE ALL INSTRUCTIONS.

English

Summary of Contents for QuietFlo 36114













Reviews: