7
1886
1886
Installing the Canopy
x2
Lift the canopy into place so that
the screw holes are aligned.
Insert the two canopy screws
found in the
hardware bag.
Fit
th
e c
an
op
y in
pla
ce as s
hown.
bag
Canopy Screw
Ceiling Bracket
Downrod
Hanging Fan
Wiring
Canopy
Blades
Light
Remote
Troubleshooting
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.
Installing the Glass
Assembling the LIght Kit
Fan style may vary.
Note:
Installing the Blades:
Align blade with guide line in motor housing. Attach each blade to a blade iron using
the blade washer, found in the hardware bag, and the blade assembly screws,
found in the
hardware bag.
Repeat x6
x18
bag
Blade Screw
x6
Blade Washer
bag
Guide Line
