TC39 Series Changer Operation Instructions
Getting Started
••••
1
1.
GETTING STARTED
1.1 Introduction
This manual provides operation instructions and information required to maintain the
TC series tire changer.
The owner of the TC is solely responsible for arranging technical training. The TC is
to be operated only by qualified trained technicians. Maintaining records of personnel
trained is solely the responsibility of the owner and management.
This manual assumes the technician has already been trained in basic tire changing
procedures.
“References”
This manual assumes that you are already familiar with the basics of tire changing.
The first section provides the basic information to operate the TC. The following
sections contain detailed information about equipment, procedures, and
maintenance. “Italics” are used to refer to specific parts of this manual that provide
additional information or explanation. For example, refer to “Equipment Components,”
page 9. These references should be read for additional information to the instructions
being presented.
The owner of the TC is solely responsible for arranging technical training. The TC is
to be operated only by a qualified trained technician. Maintaining records of personnel
trained is solely the responsibility of the owner or management.
1.2 For Your Safety
Hazard Definitions
Watch for these symbols:
CAUTION:
Hazards or unsafe practices, which could result in minor
personal injury, or product or property damage.
WARNING:
Hazards or unsafe practices, which could result in
severe personal injury or death.
DANGER:
Immediate hazards, which will result in severe personal
injury or death.
These symbols identify situations that could be detrimental to your safety and/or
cause equipment damage.
