4
••••
Getting Started
TC39 Series Changer Operation Instructions
1
128-284-2
DECAL-SAFETY INSTRUCTIONS
2
128-323-2
DECAL-EYE PROTECTION
3
128-1213-2
DECAL-TCA TPMS SENSOR
4
128-286-2
DECAL-DANGER AIR BLAST
5
128-1149-2
DECAL-WARNING AIR BLAST
6
128-489-2
DECAL-MOUNTING ARM INCLINATION
7
128-435-2
DECAL-REMOVE CLIP-ON WEIGHTS
8
128-287-2
DECAL-WARNING INFLATION
9
128-285-2
DECAL-WARNING PRESSURE LIMITATIONS
10
128-504-2
DECAL-DO NOT BREAK BEAD WITH AIR
PRESSURE IN TIRE
11
128-505-2
DECAL-KEEP ARMS AND LEGS CLEAR OF BEAD
BREAKER
12
RP6-3691
DECAL-INFLATION
13
RP6-710211210
DECAL-ROTATION DIRECTION
14
RP6-99990758
DECAL-ELECTRICITY DANGER
15
RP6-4244
DECAL-ROTATING PARTS DANGER INDICATING
16
128-1241-2
DECAL-KEEP CLEAR
17
RP6-999916311
DECAL-RUBBISH SKIP
18
RP6-999915200
SERIAL NUMBER PLATE
19
RP6-1594
DECAL-INSTALLATION DATE
20
128-1748-2
TC LOGO PLATE
21
128-1750-2
TC39 PLATE
22
RP6-999923160
DECAL-WARNING PROP 65
23
24
999923960
RP6-4221
BEAD PRESS ARM PLUS PLATE
GROUNDING PLATE
25
RP6-999923950
DECAL-INDENT
26
RP6-999923990
DECAL-ROLLER
27
RP6-999923940
DECAL-TOOL HEAD
Electrical
The TC is manufactured to operate at a specific voltage and amperage rating.
Make sure that the appropriate electrical supply circuit is of the same voltage and
amperage ratings as marked on the TC.
WARNING: DO NOT ALTER THE ELECTRICAL PLUG. Plugging the
electrical plug into an unsuitable supply circuit will
damage the equipment.
Make sure that the electrical supply circuit and the appropriate receptacle is installed
with proper grounding.
To prevent the possibility of electrical shock injury or damage to the equipment when
servicing the TC, power must be disconnected by removing the power cord from the
electrical power outlet.