9
6 • Assembling the Blades
Step 6-1 (Detail)
Blade Assembly
Screws
Use with grommet
Use without grommet
Grommet
Blade
Mounting
Screw
Steps 6-1 – 6-2
Hunter fans use several styles of fan blade irons (brackets that hold the
blade to the fan).
6-1. Your fan may include blade grommets. If your fan has grommets,
insert them by hand into the holes on the blades.
6-2. Attach each blade to a blade iron using three blade assembly
screws (the carved side should face downward). If you used
grommets, the blades may appear slightly loose after screws are
tightened. This is normal.
6-3. For each blade, insert one blade mounting screw through the
blade iron, and attach lightly to the fan. Insert the second blade
mounting screw, then securely tighten both mounting screws.
6-4.
Attach the fandangles (included) to the fan pull chains using the
plastic breakaway connector. (You may find the plastic breakaway
connector on the end of the extra chain.)
Step 6-3
43113-01 • 05/04/12
Hunter® Fan Company
